Personal tools

Difference between revisions of "Satellite Internet of Things"

From iis-projects

Jump to: navigation, search
Line 5: Line 5:
 
The goal of this project is to develop a communication system for satellite IoT applications which bases on the NB-IoT standard. In a first step the existing NB-IoT Matlab simulation framework shall be extended to support satellite communication channels. A thorough simulative analysis of system performance will enable the identification of critical bottlenecks. These shall be eliminated in the second part of the project by algorithmic optimizations and/or changes to the physical-layer specification itself.  
 
The goal of this project is to develop a communication system for satellite IoT applications which bases on the NB-IoT standard. In a first step the existing NB-IoT Matlab simulation framework shall be extended to support satellite communication channels. A thorough simulative analysis of system performance will enable the identification of critical bottlenecks. These shall be eliminated in the second part of the project by algorithmic optimizations and/or changes to the physical-layer specification itself.  
  
==Status: Available ==
+
===Status: Available ===
: Looking for Interested Master Students (Semester Project / Master Thesis)
+
: Looking for 1 Semester/Master student
: Contact: [[User:mkorb | Matthias Korb]]
+
: Contact: [[:User:Mkorb | Matthias Korb]]
 
+
===Prerequisites===
==Prerequisites==
+
: An interest in wireless communication and signal processing
: Knowledge in Matlab
+
: Matlab programming experience is helpful
  
 
==Professor==
 
==Professor==

Revision as of 16:18, 1 November 2019

Siot.jpg

Short Description

Many future Internet-of-Things (IoT) applications such as asset tracking, smart farming, or geomonitoring require world-wide connectivity. While first cellular massive Machine-Type-Communication (mMTC) standards, namely Cat-M1 and Narrowband-IoT, extend cell-radii of cellular base stations to 40km due to new extended-coverage features, truely world-wide coverage using those technologies would not be viable from an economical point of view. Satellite-borne communication systems are very promising with this respective, either as a complementary technology to cellular connectivity by covering dead spots or as a stand-alone system. NB-IoT itself is seen as a possible technology for satellite IoT (sIoT) and in fact the extended-coverage would enable communication with satellites in Low Earth Orbits (LEO). But, the NB-IoT standard is optimized for slowly moving modems only, which directly contradicts the relative transmitter-receiver speeds of up to 27’000km/h for satellite communication systems.

The goal of this project is to develop a communication system for satellite IoT applications which bases on the NB-IoT standard. In a first step the existing NB-IoT Matlab simulation framework shall be extended to support satellite communication channels. A thorough simulative analysis of system performance will enable the identification of critical bottlenecks. These shall be eliminated in the second part of the project by algorithmic optimizations and/or changes to the physical-layer specification itself.

Status: Available

Looking for 1 Semester/Master student
Contact: Matthias Korb

Prerequisites

An interest in wireless communication and signal processing
Matlab programming experience is helpful

Professor

Qiuting Huang

Related Projects

RF SoCs for the Internet of Things

↑ top