Personal tools

Difference between revisions of "A Wireless Sensor Network for a Smart LED Lighting control"

From iis-projects

Jump to: navigation, search
 
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
The main objective of this project is work in hardware and software to design a wireless sensor network to control the dimming of a industrial LED eventually using machine learning algorithms. The candidate will work with a micro-controllers and Radio transceiver (or similar System on Chip as CC2530)  at firmware level to build up the network and the control algorithm. The hardware part can include also a redesign and optimization of the nodes' boards to build an ad-hoc solution with a small form factor and with only the needed components. The human interface application on Smartphone or and embedded system (i.e. Beagle Bone Black) which is needed to interact with the network and store the information can be part of the thesis according with the skills of the candidate students. Measurements of the system will be performed from the students in order to evaluate power consumption reduction, reliability, functionality and optimize the system.
 
The main objective of this project is work in hardware and software to design a wireless sensor network to control the dimming of a industrial LED eventually using machine learning algorithms. The candidate will work with a micro-controllers and Radio transceiver (or similar System on Chip as CC2530)  at firmware level to build up the network and the control algorithm. The hardware part can include also a redesign and optimization of the nodes' boards to build an ad-hoc solution with a small form factor and with only the needed components. The human interface application on Smartphone or and embedded system (i.e. Beagle Bone Black) which is needed to interact with the network and store the information can be part of the thesis according with the skills of the candidate students. Measurements of the system will be performed from the students in order to evaluate power consumption reduction, reliability, functionality and optimize the system.
  
===Status: In Progress ===
+
===Status: Available ===
: Spring semester 2015
+
* Looking for Semester and Master Project Students
 
: Supervisors: [[:User:magnom|Michele Magno]]
 
: Supervisors: [[:User:magnom|Michele Magno]]
 +
  
 
===Prerequisites===
 
===Prerequisites===
Line 43: Line 44:
  
  
[[Category:Digital]]
+
[[Category:Digital]] [[Category:Semester Thesis]] [[Category:Master Thesis]] [[Category:Available]] [[Category:System Design]]
[[Category:Master Thesis]]
 
[[Category:Hot]]
 
[[Category:Available]]
 

Latest revision as of 11:02, 27 January 2016

Lighting.jpg

Short Description

The rapid progress of wireless communications and embedded technologies has made wireless sensor and actuator networks (WSANs) possible. These networks are distributed system consisting of nodes with sensors, intelligence and actuator interconnected by wireless links. Using sensed data the nodes use actuators to perform actions accordingly with smart control algorithms. The possible applications of wireless sensor network include smart living space, localization, environmental monitoring, smart building, etc. Recently, WSANs have been applied to energy conservation applications such as light control especially coupled with LED lights. The decision of lighting control can be made based on the light intensity and human presence in the monitored area sensed by light sensors and motion sensors. This approach can significantly reduce the power consumption and extend the lifetime of the LED lights keeping the same conform. Moreover the smart lighting application can be controlled directly from the user with a smart phone or other device.

The main objective of this project is work in hardware and software to design a wireless sensor network to control the dimming of a industrial LED eventually using machine learning algorithms. The candidate will work with a micro-controllers and Radio transceiver (or similar System on Chip as CC2530) at firmware level to build up the network and the control algorithm. The hardware part can include also a redesign and optimization of the nodes' boards to build an ad-hoc solution with a small form factor and with only the needed components. The human interface application on Smartphone or and embedded system (i.e. Beagle Bone Black) which is needed to interact with the network and store the information can be part of the thesis according with the skills of the candidate students. Measurements of the system will be performed from the students in order to evaluate power consumption reduction, reliability, functionality and optimize the system.

Status: Available

  • Looking for Semester and Master Project Students
Supervisors: Michele Magno


Prerequisites

C Language
Interest in Computer Architectures at system level
PC or Smart-phone programming
Knowledge of machine learning would be beneficial.

Character

30% Theory
50% Implementation
20% Testing

Professor

Luca Benini

↑ top

Detailed Task Description

Goals

Practical Details

Results