Personal tools

Difference between revisions of "Enabling Standalone Operation for a Mobile Health Platform"

From iis-projects

Jump to: navigation, search
(Created page with "600px|thumb|right|Platform overview with the three active ICs and flash memory. A key feature of our biomedical acquisition and processing pla...")
 
 
(One intermediate revision by one other user not shown)
Line 18: Line 18:
 
*Some experience with embedded/low level software
 
*Some experience with embedded/low level software
 
*Interest in embedded systems and uControllers
 
*Interest in embedded systems and uControllers
 
<!--
 
===Status: Completed ===
 
: Fall Semester 2014 (sem13h2)
 
: Matthias Baer, Renzo Andri
 
--->
 
 
<!--
 
===Status: In Progress ===
 
: Student A, StudentB
 
: Supervision: [[:User:Belfanti | Sandro Belfanti]]
 
--->
 
  
 
===Character===
 
===Character===
Line 35: Line 23:
 
*40% Embedded software design
 
*40% Embedded software design
 
*40% Experiments/Measurements
 
*40% Experiments/Measurements
 +
<!--
  
 
[[Category:Digital]]
 
[[Category:Digital]]
Line 46: Line 35:
 
[[Category:Processor]]
 
[[Category:Processor]]
 
[[Category:Biomedical System on Chips]]
 
[[Category:Biomedical System on Chips]]
 +
--->

Latest revision as of 15:57, 12 July 2022

Platform overview with the three active ICs and flash memory.

A key feature of our biomedical acquisition and processing platform is standalone operation: The system must be able to provide all required supply voltages and clock frequencies without external components in order to use it in wearable and even implantable in-vivo applications. Furthermore, the three involved uControllers (PULP, pulpino and a commercial radio SoC) must load their program code (that must also be up-gradable) from non-volatile storage at startup once all supplies and clocks are ready. The commercial radio SoC has integrated flash memory for this purpose; our two own ASICs share the discrete multi-Gigabit NAND flash that is also used for data storage.

We have all the key ingredients for standalone operation in place (programmable voltage converters, oscillators and boot loaders); in this project you are going to put them all together and create the missing control software/firmware. The goal is to demonstrate startup and operation of the platform with only a Li-ion battery connected.

In this thesis you will learn:

  • Firmware management in multi-chip systems
  • Details and challenges of bootloaders/boot binaries
  • Startup and synchronization challenges in complex embedded systems


Status: Available

We are looking for 1-2 motivated Semester Thesis/Group Work students
Contact: Florian Glaser

Prerequisites

  • Some experience with embedded/low level software
  • Interest in embedded systems and uControllers

Character

  • 20% Concept
  • 40% Embedded software design
  • 40% Experiments/Measurements