Personal tools

Physical Layer Implementation of HSPA+ 4G Mobile Transceiver

From iis-projects

Revision as of 17:23, 19 September 2014 by Badawi (talk | contribs) (Created page with "thumb|400px ==Short Description== The High Speed Packet Access Evolution (HSPA+) communication system was proposed alongside the release-8 of t...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
MSR officialscreen.jpg

Short Description

The High Speed Packet Access Evolution (HSPA+) communication system was proposed alongside the release-8 of the Long Term Evolution (LTE) system for the fourth generation (4G) of mobile communication. While the air interface of LTE is based on OFDM, that of the HSPA+ is based on WCDMA in order to facilitate a cost-effective network upgrade that is based solely on software upgrade without the need for replacing the operator's network equipment. In this project, the student will implement the various blocks of the physical layer in Matlab. Over the course of the project, the student will gain a very good understanding of the functionality of a standard-compliant physical layer of a mobile communication system. Possibly, the student can also investigate and analyze an interesting performance-critical block such as the channel estimation or equalization/detection gaining in-depth knowledge of the different possible techniques.

Status: Available

Suitable for a Semester project or a Master thesis
Contact: Karim Badawi

Prerequisites

Interest in Mobile Communications
Knowledge of Matlab (or willingness to learn)
C or VHDL knowledge would be advantageous but not necessary

Character

25% Theory
60% Programming & Simulation
15% Results & Report

Professor

Qiuting Huang

Detailed Task Description

Goals

Practical Details

Results

Links

↑ top